How to Replace a Kia Sportage Replacement Key
For many Kia models keys, there is an integrated keyless entry system. This key typically resembles the remote control and can be replaced with a fresh one from an Kia dealer or a locksmith.
Key fobs might stop working due to various reasons, such as batteries that are dead, worn buttons, signal interference, water damage and a damaged receiver module. Here are some guidelines on how you can get your Kia Sportage replacement key to work again.
How to replace the remote key or smartkey?
No matter if your Kia comes with an intelligent key, remote key push to start key, or regular metal non-transponder key the battery in these keys will eventually need replacement. This is especially when your car displays a message indicating that the remote or smart keys are in poor condition.
It's a fairly simple procedure. To replace the battery in the keyfob take out your mechanical key from the slit on the back of the fob. Then, push the cover off. Inside the key fob there will be a small screw that holds the battery in the correct position. Using a small screwdriver, unscrew the screw and pull out the old battery. Then, insert the new one and close the slit in the key fob.
When the key fob is equipped with new batteries Test it by pressing the locks and unlock buttons. You're good to go in case the doors lock and unlock as expected. You can now use the hands-free feature to lock and unlock your Kia when your fingers get cold or when you need to complete errands in Brandon.
Note: Certain keys may require to be programmed (transponder chips or smart keys). This requires a machine for programming, which is only available to the locksmith in the automotive or dealer. Other keys (non transponder metal keys) are not required for programming. If your key has to be reprogrammed, you must be aware of the key code written on the key code tag and keep it in a secure location.
How to replace the battery
If your Kia key fob is not responding when you press the lock or unlock button on the fob, this is a sign that the battery should be replaced. replacement key for kia sportage may also cause other problems like the check engine light flashing on or the engine not cranking. Fortunately, replacing the battery on the key fob is a relatively easy DIY task that requires only some basic tools.
Make sure that you shut off your vehicle and close the doors before you begin. Find the small, metal or plastic piece at the bottom of the key fob. Jiggle it until the metal key falls out. The key can be put into the door's driver handle to unlock your car.
To replace the key fob battery, take off the rear cover and use a plastic pry bar tool to release the latch that holds the black negative battery cable. Remove the old battery, and then align the new battery in a way that the "+" positive side is facing your face and the "negative" negative side is facing towards the fob's metallic electrical contacts. Push the new CR2032 battery straight into position, avoiding excessive force to avoid damaging or bending the contacts on the metal.
Once the new battery has been installed, turn the key fob off and back on in the ignition until the door locks cycle. You can then test your Kia's keys fob again to confirm that it is working correctly.
How do you replace the smart key
Depending on the model of the Kia Sportage, you may have an ordinary key fob or a smart key. The smart key comes with an embedded mechanical key blade, while the standard keyfob does not. Both key fobs have an internal battery that will eventually require changing. This is an easy process that takes only two minutes.
Make sure to shut off your Kia and stand on a flat or well-lit surface prior to when you begin. Keep in mind that the fob can contain tiny pieces that could be thrown off when you're not careful.
The first step is to locate the small release button that is located on the backside of the fob. It will be either an oval silver button or a rectangular slot. After pressing this button button, the mechanical blade will appear and you can then open the key fob.
Once you have the key fob open it is easy to remove the old battery and replace it. The new battery should be a CR-2032 and can be bought online or from your local auto parts store. After installation, you should be able to lock and unlock your car with your key fob even if your engine isn't running!
How do I replace the mechanical key?
The Kia key fob is an amazing convenience that lets us lock and unlock our car at the press of a button. But like any device there are issues with it from time to time. There are ways to resolve these issues and keep your key fobs in good working order for a long time.
One of the most frequent problems is a dead or dead battery. The battery could cause the device to stop working or operate intermittently. If this is the issue it is time to replace the battery a new one.
If this isn't enough to resolve the problem, try using a standard flathead screwdriver and wedge it into the fob's plastic casing. Be careful not to damage internal components, or scratch the plastic. After the battery has been removed, replace it with a brand new battery.
Close and open the door with the mechanical key. (Every Kia fob comes with a spare mechanical key that fits into the slot). Test the key fob to confirm it's functioning correctly. Contact a dealer locksmith to resolve the problem if the fob is still not working. Make sure they cut you an emergency key that can work across all trunk and door cylinders, to avoid lockouts in the future.